High Pressure Level Transmitter Level Meter and Level Sensor with Level Transmitter

High Pressure Level Transmitter Level Meter and Level Sensor with Level Transmitter

Software scope

UHZ-517C12A magnetic amount gauge is suited for liquid stage measurement in substantial temperature and substantial stress situation . Its maximum operating temperature is 420ºC , and its maximum functioning pressure is 4.0MPa .

Our gain

  • Great sealing, leakage proof and trustworthy measurement in substantial temperature, substantial stress, large viscosity and powerful corrosion apps.
  • No blind location. Hanging in display, very clear in looking through and wide in variety.
  • With alarm and manage swap, the liquid stage or interface can be controlled at upper or decrease restrict. LB transmitter converts the signal of liquid or interface amount into four~20mA DC standard signal, and achieves the purpose of distant measurement, sign, document and management.

Construction Principle

The magnetic liquid level gauge operates on principle of Buoyancy and Magnetic Coupling. As the liquid stage increase or fall in the vessel, the float in chamber will increase or drop correspondingly . The everlasting magnet in the float actuates the yellow and black rollers to reverse 180°due to magnetic coupling. As liquid level will increase, rollers reverse from black to yellow while liquid amount decreases, rollers reverse from yellow to black. The yellow/black interface of indicator displays the true level of medium in vessel. The rollers materials of typical amount gauge for atmospheric temperature is plastic resin and for substantial temperature programs(up to520ºC), alumina ceramic rollers with permanent magnet steel armored ought to be utilized.



LB transmitter imposes the degree indicators from magnetic method coupling on each and every dry reed of resistance chain in sensor. It will change output resistance continually. The evaluate voltage will change appropriately proportional to the stages in vessel. With transmission transducer, output a two wire 4~20mA analog signal HART conversation protocol is optional.

Tri-magnet (Quadra-magnet) driven level swap

BK-1/EX Tri-Magnet Level Switch, as the most reputable and sensible level swap in the entire world, has bistable memory operate. Mounted on the indicator, in the very same magnetic coupling program with stage gauge, not contact with the process medium, this amount swap is high-temperature resistant, explosion proof and shockproof. It utilizes three magnetic coupling burst switches. When the magnetic float (the 1st magnet metal) in the chamber shut to the switch, the 2nd magnetic ingredient will rotate, in the meantime the third magnet steel in the swap will rotate reversely and the push bar will actuate the switch. BK-1H/Ex Quadra-magnet pushed stage change is ideal for substantial temperature applications. The fourth magnetic coupling is employed to keep the terminal box far from the large temperature warmth source, and doing work temperature of BK-1H/Ex Quadra-magnet level switch can be up to 420ºC.

CZPT Information

 Measure assortment:  300~15000mm
 Accuracy:  ±10mm
Medium density: ≥350kg/m3
Density difference: ≥150kg/m3
Follow Speed: ≤0.08m/S
Ambient vibration: ≤25Hz
Amplitude: ≤0.5mm
Medium viscosity: ≤0.4PaS, For the substantial viscosity and simple crystallization at low temperature, heating jacket degree gauge can be used.
Substance: 304, 316, 316L, 316Ti, 321, 1.4301, one.4435, one.4401, 1.4571, one.4783, 0Cr18Ni9, 1Cr18Ni9Ti, 00Cr17Ni14Mo2, 0Cr17Ni12Mo2, 0Cr18Ni2Mo2Ti, PP, PVC,PTFE, Ti, Zr, Ta, Hastelloy C-276, Monel
Method flange: Factory common: HG2571~two 0571 -ninety seven DN25 PN1.~PN32 Or according to ANSI B16.51/two”~10″ DN10-DN250 GB/T 9112-2000JB/T 79.one-94SH3406-1996 DIN2635 DN10-DN250 DIN 2527 DN10-DN25571A~250A JIS 20K FF RF one/2″~10″ JPI
Force rating: PN1., PN1.six, PN2.5, PN4., PN6.4, PN11., PN16., PN25, PN32. Class 150LB, 300LB, 600LB, 900LB, 1500LB, 2500LB, ANSI
Operating temperature: -196~520ºC, 77.15~793.15K
Enclosure: IP66
Basic safety mark: Exia IICT1~T6 Exd IIBT1~T6

Assess with other provider items ,ZheJiang Xingshen professionals:

  • Principal pipe Diameter≥63mm,The wall thickness≥2mm
  • In comparison with aluminum alloy substance , stainless steel panel and ruler greatly boost the temperature resistance ,visual appeal and life of the product
  • The magnetic flip plate after molding is sealed in the transparent tube , entirely get rid of the craking , fading and ageing of the conventional circular column .


Firm Data

Our Services

Paperwork of item from manufacture must be Chinese/English Contrast .

Manufacture ought to give a very good warranty for after-revenue provider , use and complex check with of servicing , and ensure that solution is offered inside of 24 several hours following acquiring notice of consumer .

The manufacture ought to offer necessary conditions for the consumer coming to the manufacturing unit for inspection and acceptance

ZheJiang Xingshen need to have out inspection on the instruments , equipments and appropriate .

Each instrument and computerized handle system has long lasting plates manner of corrosion resistance stainless steel . Language on the plate ought to be English .

Packaging & Delivery



. Q: How extended will you give me the reply?
    A: we will speak to you in one hrs as shortly as we can.Skilled sales engineers 7/24 online solutions.
2. Q:Could you give me the shortest guide time?
    A:We have resources in our stock,if you truly need to have, you can explain to us and we will consider our very best to fulfill you.And our firm gives in-time supply with protection transportation,conference consumers want.
3. Q: What is your conditions of payment ?
    A: We could acknowledge Paypal, T/T,D/P,L/C,Credit history Assurance and on you ask for.
four. Q:Could I check out your factory?
    A: CZPTly invite you to check out our manufacturing unit.
five. Q: Do you give samples ? 
    A: Indeed,we have resources in inventory to help you to get the samples as before long as we can.
six. Q: How about the good quality of the managements ?
    A: We have a total good quality handle system, all of our goods will be fully pre-inspection by QC departments just before shipping and delivery to you. We have the certification of ISO, CE, HSE. we could deliver the certification take a look at of our organization to you.
7. Q: What is the warranty for your product ?
    A: Warranty: 1 several years, Life time maintenance.Income engineers and specialized will be one particular-on-1 support for you to exclude all road blocks when use our sensors.

High Pressure Level Transmitter Level Meter and Level Sensor with Level Transmitter


cast chain

As one of leading cast chain manufacturers, suppliers and exporters of products, We offer cast chain and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of cast chain

Recent Posts