China Factory Galvanized Welded Wire Mesh for Fence Panel

China Factory Galvanized Welded Wire Mesh for Fence Panel

Welded wire mesh

Welded wire mesh is built with two orthogonal wires that are joined collectively at their intersections using a resistance welding procedure to kind a grid. The line wires of the grid are guided by way of the welder employing a pattern board. The equipment drops cross wires into location and fuses them together to generate the two unique planes that type welded wire mesh.

Line wires (also known as lengthy wires) are laid out on a sample board to set the panel width spacing. Cross wires are fed into a hopper, and are programmed to be dropped 1 at a time on to the line wires. Then, the cross wires are resistance welded into place placing the panel size spacing. The panel advancements soon after the weld and the approach starts off over once again.

Welded Wire Spacing
Welded wire mesh spacing can be expressed by measuring from the center of two wires (Centre to Centre) or by measuring the opening among two wires (Very clear Opening). We can manufacture normal and custom made welded wire mesh with a square mesh spacing range from one” to as large as might be required.  Rectangular mesh spacing ranges from one/2″ x up to as prolonged as may possibly be necessary.

Edge Situations
 Welded Wire Mesh has two common edge problems: trimmed and untrimmed.

Detail specification:
Content: low carbon steel wire, galvanized wire ,stainless steel wire
Area dealing : black welded wire mesh,
electro galvanized prior to welded wire mesh,
Electro galvanized soon after welded wire mesh
scorching-dipped galvanized ahead of welded wire mesh
Scorching-dipped galvanized after welding wire mesh
PVC-coated welded wire mesh
Energy coated welded wire mesh
Wire diameter: .45mm to 12.0mm
Gap dimensions: one/three” to a hundred and fifty mm hole
Gap form: square gap, rectangular gap
Width: .3M to 2.0M
Packing : in roll or in panel

make sure you be aware, we can weave speical wire diameter welded wire mesh this kind of as one/four”X1.1mm, one/2″X1.4mm and so on on your requirement 

Welded wire mesh Specification:

Open up in inch Opening in (mm) Wire diameter
1/4″ x 1/4″
6.4mm x 6.4mm
3/eight” x 3/8″
ten.6mm x ten.6mm
1/two” x 1/two”
twelve.7mm x twelve.7mm
5/8″ x 5/8″
16mm x 16mm
3/four” x three/four”
19.1mm x 19.1mm
1″ x one/2″
25.4mm x twelve.7mm
twenty five.4mmX25.4mm
1-1/2″ x one-one/2″
38mm x 38mm
one” x 2″
25.4mm x fifty.8mm
2″ x two”
fifty.8mm x 50.8mm
two” x three”
50mm x 75mm
three” x 3″
75mm x 75mm
2″ x four”
50mm x 100mm
two.11mm,two.5mm, three.0mm, 4.0mm
four” x four”
100mm x 100mm
two.0mm,2.5mm, three.0mm, four.0mm
CZPT Note:
1,CZPT roll duration:twenty- 30mwidth: .5m to one.8m
two,Specific dimensions CZPT at ask for
three,Packing: in water-proof paper in rolls. CZPT packing CZPT at ask for.


China Factory Galvanized Welded Wire Mesh for Fence Panel


cast chain

As one of leading cast chain manufacturers, suppliers and exporters of products, We offer cast chain and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of cast chain

Recent Posts