Aluminium Cooling Bed for 2200ust Press

Aluminium Cooling Bed for 2200ust Press

one. Picture 

Aluminium handing table for 2200UST Push(8 inch billet) with five BELT Type dismantle kind (Belt can be altered separately)

Operational side will be verified by the last layout drawing.

2. Parameters
 

Parameter Prerequisite
Press dimensions 2200 UST
Get Qty One
Reducing side  
Exit Route  
Billet diameter Φ203mm / 8inch
Original table duration 15m
Max dimension of profile(W x H) 300mm×200mm
Max fat of profile 18kg/m
Run out table size 45m
Spacing 1200mm
CZPT Run out desk and saw material table are hydraulic lifting. 4 phase chain&BELT Type, dismantle.
General dimension (L x W x H) 45m×8m ×850mm

three. Principal construction

1) Specification of Desk :
    Length :45M * Width : 9M * Top : 850 Complete :38cases.  Hole:1200

two) Direct Out Table :
    
Length : 20000mm * Width : 600mm * Top : 850
    Higher temperature resistant felt roller : Ф76 / ninety six * 500mm
    Temperature : 550C Hole : 400mm

three) Cooling Blower
    On prime of direct out desk :
    three sets centrifugal blower device a single established is 6M lengthy ,every single sets has 4pcs of snail type  admirer .
    Under lifting desk
    The very first team can change up/down ,and not by air ,by gear .
    All the enthusiast managed by encode (proportioanl management of blowing fee )
    Beneath the cooling table : 20sets of blower fan .

4) CZPT Lifting Desk :
    
Size : 45000mm * Width : 700mm * Top : 85
    High temperature resistant felt roller : Ф76 / 96 *600mm
    Temperature : 480 C Gap : 400mm with hydraulic lifting stage 1 established . Lifting Peak : 50mm

5) CZPT Belt:  
    Length :45000mm * Width : 1015mm * Peak : 850
    Higher temperature felt strap transmission : Thickness:10mm*Width:100mm
    Temperature : 480 C , 38pieces
    Control : Cycloid pin electrical equipment : 3 Kw , 1 set

six) Cooling Table:
    
Duration : 45000mm * Width : 3050mm * Height : 850mm
    Large temperature felt strap transmission : Thickness 10mm*Width:100mm
    Temperature : 480 C , 38pieces
    Manage : Cycloid pin electrical device :5.5 Kw , 1 set

seven) Stretcher Feed Desk:
    
Duration : 45000mm * Width : 2200mm * Peak : 850mm
    Medium temperature felt strap transmission : Thickness10mm*Width:100mm
    Temperature : 250 C , 38pieces
    Handle : Cycloid pin electrical machine : 3 Kw , one set
    The belt need to be run by pneumatic piston.

eight) Storage Desk:
    
Duration : 4500mm * Width : 1800mm * Peak : 850mm
    Higher temperature felt strap transmission : Thickness10mm*Width:100mm
    Temperature : 250 C , 38pieces
    Manage : Cycloid pin electrical machine : 5.five Kw , one established

9) Storage Table:
    
Duration : 45000mm * Width :2150mm * Peak : 850mm
    Higher temperature felt strap transmission : Thickness10mm*Width:100mm
    Temperature : 250 C , 38pieces
    Manage : Cycloid pin electrical machine : 5.five Kw , one established

10) Noticed Materials Table :
     
Size : 45000mm * Width 1000mm * Peak : 850mm.
     Low temperature resistant felt roller : Ф76 / 96 * 800mm
     Working Mechanism : Rollers are completely powered by partial chain and moves up / down .
     The roller velocity need to be use inverter(AC Driver) to adjust in order to prerequisite.
     Temperature : a hundred and eighty C Hole : 400mm
     Transmission CZPTal machine: .fifty five KW  4 sets

11) Saw Gauge Table :
      
Duration : 9000mm * Width : 1100 * Top : 850mm
      Reduced temperature resistant felt roller : Ф76 / ninety six * 1000mm
     Temperature : a hundred and eighty C Gap : 400mm
     Lifting top : fifty cm.

     Functioning system : The rollers must be driven by chains and moved equally up and
down.. The roller speed need to be use inverter(AC Driver) to adjust in order to need.

twelve) Gauge gear :
      
Large auto design PLC managed movable gauge
      Control by : Siemens   PLC and text display screen to set and show length. 
       Working System:complete computerized to gauge length.

13) Stretcher :
      
Pulling energy one hundred twenty Tons, style of clamp ora : clamped and swerved by hydraulic driving.The back jaw need to be driven all by hydraulic system on its monitor. Motion of the stretcher shall be controlled by a motor. Incorporate the automatic conveyor technique. With one ruler .

four. Our Firm

HangCZPT Yesheng CZPT & Export Co.,Ltd. is largely engaged in giving aluminium processing equipment such as steady caster, cold mill, foil mill, stress leveler, lower-to-length line, slitting line, foil doubling device, shade coating line, degasser and filter, plate filter, circle blanking line, foil container creation line, slab caster, slab milling machine, slab noticed, melting furnace, keeping furnace, annealing furnace, getting older furnace, metal spool, work roll, backup roll, caster roll, and caster idea and so on. and the spare parts for the over equipment. And we also offer extrusion line this sort of as push, tunnel furnace, dealing with equipment, DC caster, homogenizing furnace, anodizing line, powder coating line and so forth.

China make equipment are extremely well-liked all above the entire world specifically in south east Asia, African nations, South The usa, Middle East mostly since of affordable price tag and good good quality. However, for each tools there are a lot of makers. Some are reputable and some are not. Most of customers are puzzled and will not know which suppliers are reliable. My firm’s principal enterprise is to support these clients uncover dependable suppliers for any tools with great good quality, reasonable price tag and best right after -sale services.

5. Support Assurance

1. Provide 24-hour specialized support by electronic mail or cellphone.
2. Give professional options ideal for the manufacturing line, in accordance to the specifications of consumer investment and creation capacity,
3. Provide spare elements list
four. Give basis format and structure for the factory
5. Assign skilled engineers to the website to guide the installation and commissioning, according to the customer’s demands until the closing product satisfies the customer’s needs.
6. Offer great soon after-sales service, extended-term true-time tracking of user’s field gear use, and give well timed and successful life-extended support for customers.
seven. If you want to modify the generation line, develop new products or boost gear, we will give long-term complex solutions.

Aluminium Cooling Bed for 2200ust Press

Tags:

cast chain

As one of leading cast chain manufacturers, suppliers and exporters of products, We offer cast chain and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of cast chain

Recent Posts